ifconfig doesn't work with SD image
I am trying to ssh to the galileo via ethernet after giving it an ip address through the code: ifconfig eth0 169.254.1.1 netmask 255.255.0.0 up but it spits out an error ifconfig: SIOCSIFADDR: No such...
View ArticleRSTe for Windows 8.1
Why is there not a working version of Intel's RSTe for Windows 8.1? I would like to be able to monitor my RAID without rebooting, but RSTe will not run. The little icon shows up in the task bar's...
View ArticleRe: New Bluetooth Drivers
Nothing suspicious. I was looking for any OEM driver that could be the cause. Do you have this issue on stock Windows install (no HP stuff)?
View ArticleRe: Intel Centrino Advanced-N 6230 and aptX
stix - I should have asked this before. Which version of BT software are you using? We are not able to reproducethe issue using our latest build. Which should be posted soon.
View ArticleRe: Serial connection to galileo has zero response via putty
Okay so i hooked up the connection to an oscilloscope finally. I have a usb to rs232 adapter plugged into a macbook pro (im guessing a usb3.0 port). I hooked up the oscilloscope to the output pins of...
View ArticleRe: Corrupt Arduino IDE source archive on Software Downloads page
I am also having the same issue. I tried downloading the 7z archive on the link referenced in Galileo Getting Started - Windows. No luck so far.
View ArticleHow to remove Intel HD graphics control panel desktop context menu in Windows...
There is a reg file for Windows XP but it is not working in Windows 8.1.
View ArticleClik here to view.
Re: Problem with Intel Iris 5200 Pro at 3840x2160@60Hz
isacumi!Have you checked what version monitor you have? if it`s 00 you can replace it with 01 that will probably fix the sleepmode bug. when your monitor goes to sleep mode after the driver install,...
View ArticleRe: Flashing edison over wifi (mac)
rosenrot you were spot on, with a new flash complete (v68) everything matches the doc perfectly. I'll have to wait to test the wifi upgrade method till a new version is released, but I pretty sure all...
View ArticleRe: Intel (R) Dual Band Wireless-N 7260 issue
I don't think, I have PROSET software on my PC. Also is it worth to get the NIC replaced with the same version? I understand there have been negative reports on it but from a technical point of view,...
View ArticleRe: SSH to my edison?
I found that once I had wifi working I was able to ssh to the IP of the edison without any hiccups. Nice.
View ArticleCannot update Driver to 15.33.22.64.3621
Hello, I have been trying to update my driver for quite a while now. The computer continues to give me a "not compatible with current operating system", when the INTEL Download Center says that it is...
View ArticleRe: Intel centrino wireless-n 2230 keeps dropping connection.
After months of problems with limited WiFi and general connectivity problems on Windows 8.1 I finally managed to get it to work properly. In advanced TCP/IP settings under IPv4 protocol settings I put...
View ArticleHD 4400 EU count
According to almost all sources I could find, all GT2 products (HD4200, HD4400, HD4600) have 20 EUs. However, on a i3-4130 (HD4400), GPU-Z (latest version) indicates 16 EUs. GPU Caps Viewer says 16 EUs...
View ArticleGigabit Ethernet is causing high CPU usage by DPCs process.
Gigabit Ethernet port is causing high CPU usage by DPCs process when downloading 200Mb/s and more data stream. When it goes to 45% CPU usage it can freeze whole OS. Specs:This has been observed on i3...
View ArticleClik here to view.
Re: Intel application to check X25-M G1 SSD usage, health etc.
It's a ThinkPad X60s, hence Intel 945GM Express chipset with ICH7-M (SATA I). Here's a screenshot with driver details. The driver was installed automatically during Windows 8.1 Enterprise installation.
View ArticleClik here to view.
Re: Problem playing Blu-Ray discs with PowerDvd after update to latest HD...
Hello Zack, the suggested problem of Arcx is very similar to my own (HD4000). Blurays played well until a driver-update was scheduled by Windows Update. After restart PowerDVD 10 wouldn't play Blurays...
View ArticleRe: Big scare: my D54250WYK would not start
I don't know how much it would help, but I would try this:Install the latest BIOS Revision 30, and after the update, F2 in and "Load the BIOS Defaults"Disable UEFI Boot (or alternatively Disable Legacy...
View ArticleRe: Node.js/Javascript IDE now available for Edison!
Yes, I will publish the code for the both the Edison/Galileo & 'Smart phone' parts of the demo. I will need to clean up the code and add comments first, hopefully I can get it done in the next...
View Article