Re: Blinking problem on Intel Galileo
What do you mean by "it is under 10 (COM 2)."? It shows that you selected COM2 and its not working! Is COM2 or COM10?
View ArticleRe: Intel DZ87KLT-75K gives "CPU hot" error fresh out the box
Hi Kevin, thank you for your reply. Please note my system has been running flawlessly in the last 6 months or so, so this is not a fresh out of the box issue for me. I did everything you said. The...
View ArticleRe: DZ87KLT-75K + i7-4770 fails to init CPU
KarimB, I noticed that Kevin_Intel is helping you in this thread, https://communities.intel.com/thread/49305. He will continue assisting you in order to find a solution on this issue.In the meantime,...
View ArticleRe: Intel WiDi (4.0.18.0) keep asking for security code
Yes, the issue still exists as of today, even using that tool to properly update everything. I have a PVT2000 with latest firmware and has always worked great. I updated the WiDi software to latest...
View ArticleRe: DZ87KLT-75K: PCIe GPU stuck in PCIe 1.1 x16 (2.5GT/s) mode!
Hi, I am sorry for the delay and I appreciate your patience. At this point there is no information yet but I will keep you posted.
View ArticleRe: Intel WiDi 3.5.40.0 on windows 7 64-bit keeps asking for security code...
The issue still exists as of today, even using that tool to properly update everything. I have a PVT2000 with latest firmware and has always worked great. I updated the WiDi software to latest...
View ArticleRe: Intel G41 Graphics Driver Setup Fails to Install
I do embedded graphics and it sounded like THAT issue might be at play. The other one is a puzzler. Are you familiar with the F8 key option just before boot? It brings up the Windows Boot options...
View ArticleRe: Same old story again - Newer WIDI v4.2.19.0 keeps asking for security...
The issue still exists as of today, even using that tool to properly update everything. I have a PVT2000 with latest firmware and has always worked great. I updated the WiDi software to latest...
View ArticleRe: Is it possible to use intel galileo for bare metal programming?
By following the process mentioned in application note i could debug the source code using Eclipse. Now, i could step through and check values of registers.
View ArticleHow to setup your galileo to have a static IP on a LAN
Hi Guys, I was having a bit of trouble setting up a LAN so I could network my PC to multiple galileos. I managed to figure it out with my own method and wanted to post my method to help others who...
View ArticleRe: Intel HD Graphics update problem
@ milkywayy, Here is the list of supported COPU's, the 1007u is there. I am continuing to investigate the issue you are seeing. 4th Generation Intel® Core™ Processors with Intel® Iris™ Pro Graphics...
View ArticleRe: Intel HD Graphics update problem
@ milkywayy,, is this the driver you are trying to install? http://downloadmirror.intel.com/23639/a08/win64_153314.zip&lang=eng&Dwnldid=23639
View ArticleRe: Intel G41 Graphics Driver Setup Fails to Install
As Kirk says, you can try F8 (safe mode options) to load windows with the most important drivers for the Operating System to come up. Another step but more difficult is to remember when the issue...
View ArticleRe: Supported memory not working and more trouble
UPDATE: I restored the Windows 7 image, uninstalled the Intel HD Graphics Driver for Intel NUC using remote desktop. Now Windows Update started screaming for attention. It had an "recommended" update...
View ArticleRe: DZ86BC: with BIOS 0042 continuously restarting
Current bios as of 3/4/2014: 0039 AA# G30472-402 No beeps, just displays Intel splash screen then reboots, it won't even allow you to access the bios.
View ArticleBroken IPEX connector
Dear all, When I installed my new wifi card into my NUC (DCCP847DYE) I had to remove the plastic cover on the mini IPEX connector.While pulling the plastic, one of the connector broke off from the...
View ArticleRe: Intel NUC Kit DN2820FYKH no hdd or ssd found
I completely understand your frustration. My recommendation is to update the BIOS to the latest one (if you haven’t) as part of the troubleshooting. Since this is a new product I would recommend you...
View ArticleRe: After updating to Windows 8.1: "Display driver stopped responding and has...
This seems to be fine - thanks Kevin. Have cycled through all CPU and sleep S_x states and driver behaves on wake or resume.
View ArticleRe: Official Black-screen thread - We need your help!
Are you willing to send your system to us? (Yes/No)Yes, if you have an office in The NetherlandsIs your system a laptop or desktop?desktopIf desktop, is it custom built, or manufactured?bareboneIf...
View ArticleRe: I've compiled BSP 0.9, but I lost /dev/ttyGS0
I can force it to by loading udc-core, pch_udc and g_serial with modprobe, and then spawning a getty, but I'd prefer something more automatic. How would I go about getting these modules to load at boot...
View Article